Wear-resistant ceramic special adhesive

　　1. Product introduction.

　　(1). Universal type, low odor, fast curing at room temperature, high bonding strength and good toughness.

　　(2). Components A and B are mixed into a paste, with thixotropy and medium viscosity. Temperature resistance -60 ～ 150 ℃.

　　2. Instructions.

　　It is widely used in the bonding of various ceramic sheets and metals under the working conditions below 150 ℃, the wear-resistant ceramics pasted on the surface of the magnetic separator, as well as the conveying and batching of coal conveying, powder making, ash discharging, dust removal systems and smelting steel plants Systems, hoppers, silos, wear-resistant pipes, elbows, ball mills, etc.

　　3. Performance index:

　　4. How to use.

　　(1). Remove oil stains, dust and rust from the adhered surface, polish and roughen them, clean and dry with acetone, ethyl acetate and other cleaning agents.

　　(2). The components A and B are mixed at a weight ratio of 4: 1, and the mixture is evenly mixed to make the color uniform. After mixing, apply to the treated surface to be adhered, and then close the two contact surfaces and apply contact pressure for 8 to 10 hours. Basically achieve structural strength, can be used and moved.

　　(3). After the glue is mixed, it has a pot life of about half an hour at 25 ° C.

　　(5). It is not advisable to mix too much each time, and it should be used up as soon as possible after mixing. Glue gel time is also related to temperature, the higher the temperature, the faster the gel.

　　5. Avoid contact with the skin, eyes, accidentally adhered to the skin, can be washed with alcohol or soap, and then washed with water. If you accidentally get it in your eyes, you should immediately wash it with clean water and consult a doctor.

　　(1), packaging, storage and transportation1.5kg / set, 20kg / carton.

　　(2). Store in a cool and ventilated place, the storage period is two years. After the shelf life is over, the viscosity can be used continuously without affecting the final effect.

　　(3). This product is a non-dangerous product and is transported as a general chemical.